Tin tức

A practical ASTM F88/F88M seal strength testing guide explaining Technique A, B and C, seal-strength target ranges, maximum versus average force, failure-mode diagnosis, grip and load-cell selection, and RS-8010A equipment configuration.

This article explains the differences between face, edge, and corner drop tests from a practical testing perspective, focusing on first contact points, impact load paths, orientation control, and common testing errors. It also provides guidance on developing a more reliable controlled drop test plan for consumer electronics R&D, quality control, and reliability laboratories.

ASTM D4169 complete guide for shipping container and packaging performance testing. Learn how to plan distribution testing, identify handling, vibration, compression and impact hazards, and select the right packaging test equipment.

A practical guide to low temperature testing, covering test methods, IEC 60068-2-1, operating vs. storage tests, specimen stabilization, industry applications, heat load, and equipment selection for electronics, automotive, batteries, aerospace, and materials.

A practical ASTM D882 standard execution guide focused on specimen geometry, test speed, thickness error, gripping, strain measurement, failure diagnosis and equipment configuration. It explains how to configure the RS-8010A around the actual film rather than selecting a tensile tester only by maximum capacity.

A practical ASTM D1876 T-peel testing guide covering specimen preparation, peel force and curve analysis, load-cell and grip selection, failure modes, RS-8010A configuration, and differences from other adhesive peel tests.